Denmark Heating And Cooling Inc. Commercial Service, Westland, Michigan takes pride in our fast
response time when helping you with your emergency needs. Our factory trained
service technicians and diagnostic equipment enable us to perform adjustments or
repairs when you need them, 24/7.
In addition to repairing Denmark Heating And Cooling supplied equipment, our
skilled technicians can service all brands of HVAC equipment and systems. With
Denmark Heating And Cooling Inc. as your partner, you can be confident that all
repairs are done correctly.
To minimize future repair bills, consider a Service Agreement with Denmark
Heating And Cooling Commercial Service. Our experts will tailor the agreement
specifically to your needs and provide preventive and predictive maintenance to
help you keep all your equipment up and running efficiently
Denmark Heating And Cooling Inc. Commercial Service offers Preventive
Maintenance Service Agreements for all brands of rooftops, chillers, boilers,
compressors, air-handler, cooling towers, pumps, variable speed drives, controls
Each agreement is tailored to meet the budget and operating needs of your
facility and can include both preventive maintenance to keep your equipment
running in peak condition and predictive maintenance services to identify
potential problems before costly breakdowns occur.
Denmark’s Service Agreements will help you:
· Maintain the efficiency and reliability of all equipment
· Minimize downtime, repair bills, and loss of use
· Ensure continuous care with our after hours call center
staffed with Denmark's employees
Service Agreement options include:
· Inspection and reports
· Inspection with seasonal adjustments and preventive
· Full maintenance, including preventive maintenance plus
· Predictive maintenance, including eddy current test,
combustion analysis, and vibration analysis
· 24/7 monitoring
· Maintenance of chiller, boilers, cooling towers,
compressors, air handlers, rooftop units, airside
equipment, and controls
For large Buildings
Variable Speed Screw Chiller
300 to 550 Nominal Tons
(1055 to 1934 kW)
For Extra Large
High-Efficiency Hermetic R-134a Centrifugal Chiller
200 to 1,500 Nominal Tons (703 to 5275 kW
For Extra large buildings
Double-Effect Direct-Fired Chiller/Heater
100 to 1500 Nominal Tons (Cooling)
916 to 13,740 MBH (Heating)
For Small and Medium
Gas Heating/Electric Cooling Units
2 to 25 Nominal Tons
Air Conditioning and Heating Units For Medium and Small Buildings, Roof
Mounted Gas Heat or Electric Heat or Heat Pump With Electric Cooling
We Have the Tools and Know How to Clean Chiller Tubes
to "Like New" Condition.
This Will Restore the Machine to Near it's New
Factory Efficiency .
|We Also have the Know
How and Tools to Clean
also do special
Whether you need to replace a critical piece of HVAC equipment or your entire existing system, you can be sure that
Denmark's Commercial Service will make equipment and controls recommendations that best fit your specific needs.
When an emergency replacement is required,
Denmarks’s quick response will:
Planned upgrades provide the opportunity to:
- Keep downtime to a minimum.
- Deliver portable rental equipment on-site, usually within hours.
- Ensure the comfort of your patrons.
Denmark also offers multiple, flexible financing solutions through our lenders at the best
possible interest rates and highest quality of service to ensure the success of your replacement.
- Improve the operation and reliability of your equipment.
- Install Denmark's own energy-saving, high-efficiency products and controls.
- Explore building automation and energy management solutions with our experts.
Re-commissioning Building Systems
Commissioning, which simply means
making sure building systems are running as
designed, is an essential part of building
construction, and because these systems degrade over
time, they must be periodically retested. Such
re-commissioning pays huge dividends, says a recent
Department of Energy sponsored study: a 15 percent
reduction in energy use at a cost of just 27 cents
per square foot, for a payback time of less than
Commissioning entails an
analysis and a tune up, and usually requires the
services of an energy auditing mechanical contractor
such as Denmark Heating and Cooling. Systems also
have to be maintained and re-commissioned every
three to five years. Denmark Heating and Cooling can
then make recommendations for improving mechanical
systems performances; for example, builders usually
install oversize systems even though air
conditioning operates most efficiently at full
power. The upside: You can probably upgrade to a
smaller system that uses less energy. Today's
heating and cooling and refrigerating systems are up
to 40 percent more efficient than those built 20
years ago. If you cannot replace yours, if its not
in the budget, improve it with a solid state
variable speed motor drive that controls motors
speed according to demand.
The biggest energy draw in an
industrial facility is the industrial process, which
also adds to the plants cooling load. Processes vary
across industries, but electric motors are common to
most of them, and they are an easy place in which to
find energy savings. New, modern highly efficient
motors are up to eight percent more efficient than
the oldest motors now deployed. A solid state
variable speed drive which can be attached to motors
on pumps and fans is an even more powerful tool; it
can increase the system's energy efficiency 50
percent, with a payback of as little as six months.
These are some of the procedures Denmark Heating and
Cooling can provide you with from our
re-commissioning services we offer. Many of these
products now qualify for government tax credits in
commercial as well as industrial applications.